Fluke 28 II EX Intrinsically Safe True-RMS Multimeter
Authorized Dealer
As an authorized dealer of these brands, these instruments ship genuine and factory sealed, direct from the maker, with the manufacturer documentation in the box.
The Fluke 28 II EX is an intrinsically safe true-RMS digital multimeter built for work in and around hazardous locations. It carries certification for Class I, Division 1 and Zone 1 and 2 gas areas, so it can travel with technicians across petroleum, chemical and pharmaceutical sites without compromising compliance.
The 28 II EX measures AC and DC voltage to 1000 V, AC and DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF and frequency to 199.99 kHz. It also reads temperature from -200 °C to +1090 °C and captures transients as short as 250 µs, covering a wide troubleshooting range from a single tool.
The meter is sealed to IP67 against water and dust and is tested to survive a 3 meter drop. A 6000 count backlit display adds a 19,999 count high-resolution mode to keep readings clear in dim or bright conditions, and three AAA batteries deliver about 400 hours of use.
What's Included:
- Fluke 28 II EX intrinsically safe digital multimeter
- Ex-holster
- Test leads (1 pair)
- Alligator clips (1 pair)
- Installed batteries
- Quick reference guide
Specifications
- DC voltage: 0.1 mV to 1000 V, ±(0.05% + 1)
- AC voltage: 0.1 mV to 1000 V, ±(0.7% + 4) true-RMS
- DC current: 0.1 µA to 10 A, ±(0.2% + 4)
- AC current: 0.1 µA to 10 A, ±(1% + 2) true-RMS
- Resistance: 0.1 Ω to 50 MΩ, ±(0.2% + 1)
- Capacitance: 10 nF to 9999 µF, ±(1% + 2)
- Frequency: 0.5 Hz to 199.99 kHz, ±(0.005% + 1)
- Temperature: -200 °C to +1090 °C (-328 °F to +1994 °F)
- Display: 6000 counts, 19,999 counts high-resolution mode, backlit LCD
- Safety rating: CAT III 1000 V, CAT IV 600 V
- Hazardous area certification: ATEX and IECEx Ex ia IIC T4; Class I, Division 1, Groups A to D
- Protection: IP67 sealed, tested to a 3 meter (10 foot) drop
